Skip to main content
Wilds.aiVoice And Input
W
Voice, keyboard, and gamepad input — wilds.ai Help

← Back to Wilds Handbook

Help & Guides

Voice, keyboard, and gamepad input

Play wilds.ai with your voice, keyboard, controller, or touchscreen. Learn push-to-talk, continuous listening, and every navigation shortcut.

6 min read•Updated November 12, 2026

On this page

  • Voice input
  • Narration
  • Keyboard navigation
  • Gamepad support
  • Touch
  • References

wilds.ai supports four input modes (keyboard, voice, gamepad, and touch), and every interactive element is reachable with any of them. The UI auto-detects what you're using and switches hints, focus outlines, and on-screen controls to match.

#Voice input

In any chat input, the microphone icon on the right toggles voice mode. Two modes are supported: push-to-talk (hold space while the mic is active) and continuous listening (speak, pause, and wilds detects end-of-turn automatically). Voice transcripts are streamed and shown live, and you can edit before sending.

  1. Click the microphone icon in any chat bar. Grant browser mic permission the first time.
  2. Choose push-to-talk or continuous mode from the voice settings gear. In a character chat, the PTT, VAD and Wake switch under the microphone sets it; on a phone, set it under Voice → Input Mode in the chat's panel, and the microphone switches at once.
  3. For push-to-talk: hold space and speak. Release to transcribe.
  4. For continuous: just speak. Pause for about 800ms to end the turn.
  5. Edit the transcript if needed, then hit Send.
Voice costs more
Voice turns use roughly 2× the credits of text turns because they include speech-to-text and optional text-to-speech narration. Voice is available on Plus and above. Pro and Forge unlock the higher-quality Oracle voice models.

#Narration

With Text-to-Speech on, each turn is read aloud as soon as its text is final. In a world whose characters have their own voices, the narrator reads the description and each character speaks their own lines; the reading starts while the turn is still being saved. A turn that fails after its reading started (the row reads as a failed turn with Retry) stops its narration at once. A long passage in one voice is read in parts: the opening sentence plays within a few seconds while the rest of the passage is being made, so a long turn does not wait for all of its audio before it starts. Apart from your own quoted lines, which the narrator reads, nobody speaks in the narrator's voice: a character whose stored voice is the narrator's, someone met in play, and a voice the story describes without naming ("the woman at the fruit stall") each speak in a voice of their own, the same one every time they speak, and an unnamed voice in the gender the story gives it. An opening is read in the voices its speech bubbles show.

In a visual novel the voice reads the line on screen. Each line is read when it appears, in its speaker's voice, and the voice stops at the end of that line until you move on. Moving on with a click or Continue ends the line you leave and reads the next one, and Skip reads the line it stops on; with Auto on, each line waits for its voice to finish before the next appears.

A line under the story says what the narration is doing:

  • Preparing narration… the voice is being made.
  • Narrating… it is playing; the words are highlighted as they are read. Pause beside it holds the reading where it is, on a phone as on a computer.
  • Narration paused the reading is held, by Pause or by the pause screen (Esc). Resume continues it from the same word; closing the pause screen does too. Your next action's reading starts unpaused.
  • Press anywhere to hear the narration your browser blocks sound until you interact with the page. One click or key press plays it.
  • Narration didn't load. Tap to retry. the audio did not arrive. Tap the line to try again.
  • Narration paused: too many requests. Tap to retry. too many clips in a short time. Wait a moment and tap.

While Text-to-Speech is on, the newest narrator turn carries Read aloud (🔊) beside Regenerate: it reads that turn again from its start, in its voices, and stops whatever is being read. Use it to hear a turn you skipped, cut short with your next action or read while the sound was off, or the last turn of a story you come back to.

The two retry lines belong to their turn: they go away when you send your next action or turn Text-to-Speech off. Mute hides them until you unmute.

When you come back to a story, its log opens at the latest turn. A new story opens at the first line of its opening, and the log follows new text from your first turn, or once you scroll to the end. Your scroll wins over the story log. While you stay with the narration, the log keeps the word being read in view, and keeps the newest text in view as it arrives. Scroll anywhere else (down to read ahead, up to re-read, with a wheel, a finger, the scrollbar or the keys) and the log stays where you put it: neither the highlight nor new text moves it, and nothing scrolls while your finger or wheel is still moving. Back to the narration at the foot of the log returns to the word being read, and New text ▾ to the newest line; scrolling back to the end follows new text again.

Mute (M) pauses the reading and unmute resumes it; the Text-to-Speech switch and the Speed slider are in Voice & Audio. Until you move Speed, a narrated line reads at 90 percent of the voice's pace, and the narration that plays while a turn is still being written reads at the voice's own pace, so the voice never sounds deeper than the one you picked; a speed you choose applies to both. The narration plays at the Dialogue volume times the Master volume, so Master turns it down with every other sound and Dialogue sets it alone; both apply to the clip being read.

#Keyboard navigation

Every button, card, and menu is focusable with Tab, activated with Enter or Space, and escapable with Escape. Arrow keys navigate within lists, grids, and menus. The focus outline is always visible: wilds uses a two-layer outline (teal border + soft teal glow) so it's legible on every theme.

Global navigation

Tab
Move focus to next element
Shift + Tab
Move focus to previous element
Enter / Space
Activate the focused control
Esc
Close overlays, collapse sidebars, exit menus
?
Open the keyboard shortcut cheatsheet anywhere
← → ↑ ↓
Navigate within lists, grids, and menus
PageUp / PageDown
Scroll the focused panel or page

#Gamepad support

Plug in any standard gamepad (Xbox, PlayStation, Switch Pro, generic USB/Bluetooth) and wilds detects it automatically. A small toast confirms the connection and the UI switches to gamepad mode: larger focus outlines, auto-scrolling focus, and an on-screen cursor region for menus that need pointer-like navigation.

  • D-pad and left stick: move focus between elements.
  • A button: activate the focused control, the stars, pits and points a game draws on its map or board included.
  • B button: cancel, close, go back.
  • X button: open the quick action menu in session.
  • Y button: toggle voice input.
  • Right stick: scroll long content up and down.
  • Bumpers (LB / RB): jump between panels — sidebar, content, and other focus sections.
  • Start button: open the main menu / pause.
On-screen keyboard
When you focus a text input while a controller is connected, wilds opens a full on-screen keyboard you can navigate with the D-pad. It supports autocomplete, voice input, and one-tap shortcut rows for common chat phrases.

#Touch

On tablets and phones, every control is tap-sized (minimum 44×44px), long-press opens context menus, and swipe gestures work for carousels, sidebar drawers, and quick actions. The mobile top bar auto-hides on scroll so the chat input gets the full screen height.

Open Settings → Input

Configure voice mode, controller layout, and focus behavior


#References

  1. Keyboard Shortcuts: Full shortcut reference grouped by context.
  2. Accessibility: Themes, reduced motion, and screen reader support.
  3. Multiplayer: How voice chat integrates with co-op sessions.
  4. Session Tactics: Playing with voice vs text input.

In character chats, Hear replies in the header controls ongoing narration at every screen width. It is off unless you have turned it on for that character. It is the one control for ongoing narration: the Voice tab has no auto-narration checkbox. Hear this plays the opening or the first reply without enabling ongoing narration. Game narration keeps its existing device and voice preferences.

← PreviousInventory, shops and lootNext →Classic recreations (Z-machine + Scott Adams text adventures)

Related guides

Keyboard shortcuts reference

Every shortcut in one place, grouped by context.

Read →
Accessibility settings

Themes, reduced motion, focus outlines, and screen reader support.

Read →
Getting started

First world, first session, first run-through.

Read →
Online
|Persona: Default
Voice: Off