Skip to main content
Wilds.aiStudio Transitions
W
Transitions — wilds.ai Help

← Back to Wilds Handbook

Help & Guides

Transitions

Choose a transition, set its length and direction, and read card-boundary and render-box limits.

4 min read•Updated November 18, 2026

On this page

  • Transitions
  • Apply
  • Availability
  • Guide and keys

Select the scene before a boundary, open Transitions, and preview how it leads into the next scene. Availability depends on both your film's access and the render box's supported kinds.

#Transitions

Open "Transitions" from the inspector's "Titles and credits" section or the gallery's tab row. "Change the boundary" opens "Choose a boundary". Choose the leaving scene with "Place here", or "Cancel". The boundary line names the neighbouring scenes. "The film ends here. Nothing to run into." means the selected scene has no following scene.

The nine kinds appear as eighteen directional tiles:

KindTile names
Cut"Cut"
Crossfade"Crossfade"
Dip to black"Dip to black"
Dip to white"Dip to white"
Wipe"Wipe from the left", "Wipe from the right", "Wipe from the top", "Wipe from the bottom"
Slide"Slide from the left", "Slide from the right", "Slide from the top", "Slide from the bottom"
Circle open"Circle open"
Circle close"Circle close"
Diagonal wipe"Diagonal wipe from the top left", "Diagonal wipe from the top right", "Diagonal wipe from the bottom left", "Diagonal wipe from the bottom right"

"Search templates" searches the tiles. Chips group "Fades", "Wipes", "Slides", "Circles" and "Diagonals"; "All" clears the chips and "Clear" clears the search. "Recently used" and "Name" change the order. "Replay" plays a tile again. With reduced motion, use "Play" yourself. The frame uses the two scenes at the selected boundary; "Plates not loaded" means their pictures failed to load.

#Apply

"Use" applies the selected kind at this boundary and opens its fields. "Length" is in milliseconds. The initial length comes from the stored transition, or defaults to 500 ms for a crossfade or dip and 300 ms for the other animated kinds. Cut has no bridge.

"Direction" appears for a wipe, slide or diagonal. Choose "From the left", "From the right", "From the top" or "From the bottom" for a straight wipe or slide. Diagonals offer "From the top left", "From the top right", "From the bottom left" and "From the bottom right".

"Apply" writes changed fields after the check. "Reset" restores their stored values. "Checking" means the check is pending; "The transition did not reach the studio." offers "Try again".

"Bed fade" appears when the following bed differs or the bed ends. Its number field shows the hint "None: 0 ms". Enter 0 to remove the fade; a length may be from zero to 5,000 ms. The bed fade and picture transition are separate settings.

"Set as the usual transition" remembers the kind, direction and length on this device. The boundary then offers a key such as "Use the usual: Crossfade 500 ms". It applies to the selected boundary and goes through the same check.

Boundary rules
"A transition is at least one frame" and "A transition is at most 2,000 ms" bound an animated bridge. It must also be shorter than both neighbouring scenes. At a boundary touching a card, Cut and Dip to black are allowed; the other kinds read "A card takes only a dip to black". The final scene has no outgoing bridge.

#Availability

"Not offered" gathers "Dissolve", "Pixelate", "Radial", "Zoom" and "Blur". Each reads "Not drawn here" with "Not in this version: the preview could not match the render." These tiles have no Use key.

"Not on this render box" means the server's supported list excludes the kind. "Not checked on this render box" means the supported list is absent for a new kind. Neither state can be unlocked by choosing another plan. Choose a supported kind.

Cut, Crossfade, Dip to black and Wipe form the engine set. The additional kinds carry Pro requirements on account films. The public demo lets you try the supported kinds. Account-film access follows the shipped policy; a plan badge alone does not open a held capability.

#Guide and keys

"Guide" opens this section beside the gallery on desktop and as a page on phone or tablet. "Close" returns from the pane or gallery. "Open the demo reel" opens the practice film; The demo reel explains how to reset it.

Transitions

Left or Right arrow on a tab
Change the gallery tab
Arrow keys in the grid
Move between tiles
Space on a tile
Play its preview
Enter on a tile
Use it when available
Up or Down arrow in Length
Step 10 ms; hold Shift for 100 ms
Escape
Close the guide first, then return through the gallery's open panes

The tabs and action rows scroll within their row at narrow widths. Offline, the gallery can show its cached tiles; applying a transition needs a connection.

← PreviousTitles and creditsNext →Playing wilds.ai in VR

Related guides

Titles and credits

Browse the galleries and edit a template.

Read →
The demo reel

Try transitions on a practice film.

Read →
The Basic timeline

Select the scene before a boundary.

Read →
WildWeave writing studio

Write the documents that accompany your film.

Read →
Online
|Persona: Default
Voice: Off