Skip to main content
Wilds.aiStudio Titles And Credits
W
Titles and credits — wilds.ai Help

← Back to Wilds Handbook

Help & Guides

Titles and credits

Browse and edit titles, credits and lower thirds. Fix readability findings before applying a change.

9 min read•Updated November 18, 2026

On this page

  • Galleries
  • Templates
  • Placement
  • Editor
  • Type
  • Colours
  • Motion
  • Timing
  • Content
  • Credits
  • Lower-third place
  • Findings
  • Saved looks
  • Plans
  • Keys and connection

Choose a template, preview it with your film's words, then edit its type, colours, motion, timing and content. The editor checks the draft before you apply it.

#Galleries

Select a scene and open "Titles and credits" in the inspector. "Add a title", "Add credits", "Add a lower third" and "Transitions" open the corresponding tab: "Titles", "Credits", "Lower thirds" or "Transitions". "Change the scene" opens the scene chooser. With "No scene selected", use "Choose a scene" first.

"Guide" opens this article beside the gallery on a desktop, or as a page on a phone or tablet. The pointer "New here? Titles, credits, lower thirds and transitions have a guide." has a "Got it" key. Your account keeps that dismissal. "Close" returns to the film.

The tabs and action rows scroll sideways when their words need more room, and a Previous and a Next key at their ends move them about one view at a time. The page itself stays within the screen. "Open the demo reel" takes you to a practice film; see The demo reel for what is kept.

"Search templates" searches the names, descriptions and template words. "Clear" removes the search. Use the chips to narrow the list: "Serif", "Mono" and "Morph" for titles; "Roll", "Cards" and "Bookend" for credits; "Band", "Plate" and "Cite" for lower thirds. "All" clears the chips. "Mine" shows saved looks. Sort by "Recently used" on this device or by "Name".

An empty saved list says "No saved templates. Save one from the editor with 'Save as my template'." A plan that cannot save account templates says "Saving your own templates comes with Forge." with "See plans" where available.

#Templates

Every tile previews its own frame. "Uses the film's words" means the template has taken words from your film; "Sample words" identifies its examples. The title comes from the film's title, and a lower third uses the scene's label where one exists. "Replay" plays the motion again. With reduced motion enabled, use "Play" to start it yourself.

TabTemplateUse it for
Titles"Morph title"Two title lines, an optional word change and subtitle phrases
Titles"Serif title"A chapter card, epigraph or part number
Titles"Slate"A title with a date, place or source line
Titles"Bookend"A short opening card
Credits"Credits roll"Sections that scroll at a readable speed
Credits"Credits cards"Sections shown on separate cards
Credits"Closing bookend"A closing title with a credit line
Lower thirds"Band"A name and role on the label band
Lower thirds"Plate"A name over footage, above the band
Lower thirds"Cite"A person and source in the strip's form

Select the tile's name to read its detail pane. It lists editable and fixed groups, defaults and length. "Previous" and "Next" move between templates. "Edit without placing" opens a draft in the editor; it does not add a layer. Its placement key reads "Use on this scene".

#Placement

"Use" places a template and opens its editor. Titles and credits belong "On a card scene". Lower thirds belong on a scene whose kind is not Card. A lower-third tile's "On any scene" label is broad; the placement rule is "A title or credits go on a card scene; a lower third on any other."

If the selected scene cannot take the template, choose from "Choose a card scene for the title", "Choose a card scene for the credits" or "Choose a scene for the lower third". Press "Place here", or "Cancel" to return. "Checking" means the studio is checking the placement before writing it.

Without a suitable card, the gallery says "No card scene in this film. Titles and credits need a card scene; try them on the demo reel." The repository workflow instead says "No card scene in this film. The Editor adds one in the repository." A film without scenes reads "The film has no scenes. Import it again from its repository." and offers "Open the studio".

The inspector lists placed layers with "Edit" and "Remove". "No titles, credits or lower thirds on this scene" means the scene has none. Remove writes an edit that you can undo in the film's log. "This layer is gone. Reload the film." means another edit removed it; use "Reload". An engine title card is listed as "Title card: the engine's" with "How"; it has its own form.

#Editor

The editor works on a draft. "Draft, not applied" means your changes are visible in the preview but have not been written to the film. The available groups are "Type", "Colours", "Motion", "Timing" and "Content". A template exposes only the groups it supports. A fixed group keeps the template's form.

Use "Play" or "Replay" to watch the draft and the preview-time control to inspect a frame. "Apply" writes a placed layer when the draft has changed and the check permits it. "Reset" restores the stored layer; "Nothing to reset" means the fields already match. Closing a changed draft offers "Discard" and "Keep editing". In the editor, "Guide" opens a separate tab on phone and tablet so the draft stays open. On desktop it opens beside the editor; "Open the full guide" opens a separate tab.

#Type

"Face" offers "Serif" or "Mono" where the template supports a face choice. "Size" offers the steps the template can draw. "Tracking" offers "Tight", "Normal" and "Wide". The measure beneath the size controls reports how the smallest line reads on a phone.

The 13 px rule
The smallest measured capitals must read at least 13 px tall when the film is 320 px wide. A long line may shrink to fit, so increasing the size alone cannot guarantee a pass. Use fewer words or a larger offered size, then read the finding. A character missing from the chosen face must be changed or set in a face that contains it.

#Colours

Set "Ink", "Dim" and "Background" with a swatch or a hex value. An invalid value reads "Enter a colour like #F2EFE9". "No dim on this template" explains an absent dim control.

"Presets" includes "Film", "Crime", "Fantasy", "Horror", "Sci-fi", "Mystery", "Western", "Cyberpunk", "Post-apocalyptic", "Steampunk", "Romance", "Comedy", "Survival", "Roguelike", "Visual novel" and "Simulation". "Custom" means your colours differ from the presets. Read the ink-on-background ratio after a change: the check requires at least 4.5 to 1 for text at rest. On the morph title, "Dim is not measured on this template: the letters pass through it and never rest."

#Motion

"In" and "Out" offer the motions supported by the template: "None", "Fade", "Rise", "Slide from the left" or "Slide from the right". The morph title offers "Morph" or "Fade" for its entrance. "Linear" and "Ease" set the timing curve. The template's fixed motion has no editable Motion group.

#Timing

"Start" and "Length" locate the layer inside its scene. "Start at the playhead" and "End at the playhead" use the selected time. Enter a time as minutes, seconds and milliseconds; the error says "Enter a time like 0:04.000".

"Hold", "In" and "Out" divide the layer's time. "A title holds at least 1,000 ms" means its hold must be lengthened. "This layer would end past the scene. Shorten it or lengthen the scene." means its window exceeds the scene. The entrance, hold and exit must also fit that window.

A credits roll uses "Speed", from 0.5 to 2 lines a second. Its required length follows its lines. "Lengthen the card", where offered, opens the scene's length control. Credits cards use "Hold per card". On a title or credits layer with a following scene, "Change" beside the transition opens its controls.

#Content

The fields follow the template: "Line 1", "Line 2", "Title line", "Body line", "Name", "Role" or "Credit line". "From" and "To" set the morph's word change. "Phrase 1", "Phrase 2" and "Phrase 3" set its subtitles. "From and To are unused when In is Fade." explains why those words do not animate in that mode.

Counters show each field's bound. "Line 1 is empty" and "Title line is empty" identify a required line. "Use the film's words" restores the film's title or credits defaults; "Use the scene's label" restores a lower third. The confirmation reads "Set from the film's title", "Set from the film's record" or "Set from the scene's label".

#Credits

In "Sections", type a "Section name" and its lines. "Add a section" and "Add a line" extend the credits; "Move up", "Move down" and "Remove" change their order. Removing a section with lines asks for confirmation; "Keep" returns to editing. "Preview from here" seeks to that section. If you remove every own section, the editor says "No sections of your own. The automatic section rolls on its own."

The automatic section follows your own sections. It reads "Filled from the film's rights lines." Its lines come from the assets and faces used in the film; they are read-only here. "Where these come from" explains the record. The repository workflow reads "Filled from the film's rights lines. Edited in the repository." and offers "Edited in the repository".

"Copy for the description" copies those lines as text. "Copied" confirms the copy. If the clipboard refuses, "Copy did not work. Select the lines and copy them." lets you copy by hand. "The rights lines could not be read." offers "Try again". The explanation reads "A file's rights fields are set in the Files bin."; on a phone the explanation reads "The Files bin needs a tablet or wider."

#Lower-third place

"Place" offers "On the band", "Above the band" and "Custom". Custom exposes "X", "Y" and "Width" as percentages. "Inside the title-safe box: 5 to 95 percent" describes the allowed area. The width must fit beside its X position. Read the overlap findings before applying a move.

#Findings

A change starts a check after you pause typing. "Checking" means the answer is pending. "Error" holds Apply; "Warning" and "Note" explain conditions that can be accepted. "Show" opens the group responsible for the finding. A phone can expand the findings count to read its rows.

"The check did not answer." offers "Try again". Offline, "Checking when you reconnect" keeps the draft for the next check. "This template is not on the server. Reload the page." asks for the new registry. "The fields hold a value the server refuses. Reload the page." identifies an incompatible template value.

#Saved looks

"Use in this film" opens "Name this look". Enter a name, then "Keep", or "Cancel". "A name has no '@'" explains the reserved character. The saved look appears under Mine in this film and travels with its records. Its menu has "Rename" and "Remove from this film". A look in use must be kept until its layers change. "Update the look" changes the named look from a layer that uses it.

"Save as my template" opens "Name this template". "Save" keeps an account template; "Saving" means the request is pending and "Saved" confirms it. "My templates" lists account templates with "Rename" and "Delete". Deleting an account template leaves copies already placed in films intact. "The template was not saved." and "The edit did not reach the studio." offer "Try again".

#Plans

Every template can be previewed on the public demo. Saving an account template requires Forge. "See plans" describes access; the badge beside a control identifies its requirement. While checkout is paused, "See plans" is greyed and its note reads "Coming soon". A badge does not open a capability that the server holds closed.

The named starter set is Serif title, Bookend, Credits roll, Closing bookend and Band. The other templates carry Pro requirements on account films; a custom lower-third place carries Plus. Account-film editing follows the release's policy, so read the control's availability sentence before placing or saving. A layer kept after a plan change remains in the film; editing may be read-only.

#Keys and connection

Galleries and editor

Left or Right arrow
Change a focused gallery tab, editor group or choice
Home or End
Choose the first or last gallery tab
Arrow keys
Move between gallery tiles
Space
Play a focused tile
Enter
Use a focused tile when placement is available
Left or Right arrow on the preview time
Move 100 ms; hold Shift for one second
Up or Down arrow in Start or Length
Step 10 ms; hold Shift for one second
Option or Alt with Up or Down
Reorder a focused credits section or line
Escape
Close the guide first; in the gallery, clear a search or return from an open pane before closing

"Reading the templates" marks the first read. "The templates could not be read." offers "Try again". "This tile could not be drawn" can also be retried. "Plate not loaded" means the underlying scene picture failed to load. Offline, cached templates can be browsed and editor fields can be previewed; writes need a connection. "The template did not reach the studio." means placement failed, so use its retry key.

← PreviousThe studio pageNext →Transitions

Related guides

Transitions

Choose the cut between neighbouring scenes.

Read →
The demo reel

Try the templates on a practice film.

Read →
The Basic timeline

Select a scene and adjust its length.

Read →
WildWeave writing studio

Write the documents that accompany your film.

Read →
Online
|Persona: Default
Voice: Off