Skip to main content
Wilds.aiStudio Modes
W
Studio modes — wilds.ai Help

← Back to Wilds Handbook

Help & Guides

Studio modes

Choose Basic or Advanced, keep your account preference, and understand the phone view in WildWeave.

4 min read•Updated November 18, 2026

On this page

  • Mode
  • Monitor
  • Stage
  • Bins
  • Properties
  • Phone
  • Guide

Choose the view from the film's strip header or the studio mode setting. Your account keeps the choice for the next film and device; a phone keeps the cards readable.

#Mode

Choose "Basic" or "Advanced" in the film's header. The same keys appear under "Studio mode" in Settings → Controls. The selection, an open edit and the film's place, playing or paused, stay as they were when you switch. While the film loads, the screen says "Reading the film"; a switch announces "Switched to Advanced". At wide widths the keys read "Basic view" and "Advanced tracks".

The setting says: "Advanced shows the tracks and the properties panel on a tablet or wider." The window's width decides it, not the device: Advanced draws in a window 768 px wide or wider, which a tablet held upright has. In a narrower window, such as a phone's or a tablet's in split view, the Basic view is shown with a sentence saying so, and the choice is kept. Choosing Advanced saves the preference and, in a window that wide, draws one workspace that fills the window: the monitor over six tracks (Video, Picture, Overlay, Voice, Bed and SFX) under one ruler, the bins at the left, and the inspector at the right with Basic's panels as tabs under it. Properties, with its Edits and Inspect tabs, stands below the tracks. Each region scrolls inside its own frame, so on a short window the tools, the ruler and the first track stay in view. A track's "Lock" holds it still wherever an edit comes from, the "[" and "]" trims included. On the demo reel the tracks make the same local edits as the cards. The Advanced timeline guide walks the workspace.

On the Video track each scene is a block: a frame at its left, then "Scene 3 of 34", its title, and its kind in italics with its length ("1:29 at 0:44"; "1:29" on a tablet). The frame draws the scene's poster, a small picture about 320 px wide, as the cut plays the scene. For a still or a clip in the film's own storage (an imported film's files, a pushed draft part) the poster is the still scaled down, or the clip's frame one second in (its first frame when the clip is shorter); it is made the first time a frame asks for it and kept beside the file in the account's own storage, so an imported film's frames fill in on first view. Two posters are made at a time, and a film opened for the first time with many scenes fills its frames in over its next reads: a frame whose poster the server had no room to make, or could not load, stays empty until the film is read again, and asks for it then. A card, a scene with no poster, a file with no picture, a file that does not open and a picture larger than a 4K frame (3,840 by 2,160 at 8 bits a channel; a 12 megapixel photograph and a 10-bit 4K clip are over it) have an empty frame, since a block loads neither a full-size still nor a clip for a frame that small. The selected scene's block has an accent edge and, when the block has room, "Play from here", which plays the film from the scene's start. While the film plays, a bar along the foot of the playing block shows how far into the scene the playhead is, and a screen reader hears "Playing" on that block. A block too narrow for its frame draws its words alone, and one too narrow for its words shows its scene number alone; its whole name stays with the block for a screen reader and in the properties. The trim handle is the end of its own block and never reaches into the next one, so a press just inside the next block selects that block. On a block with the room it is 24 px wide on a desktop and 44 px on a tablet; a narrower block gives it its last quarter, and a block showing its number alone keeps the number as a key that selects the scene. While you drag a scene's right edge, or press the arrows on it, a note beside the edge reads the new length and the change ("1:30.200, +1.200 s"); a clip scene's edge turns red where its source ends, with "This scene's clip ends here", and neither a drag nor the arrows take it further. The note stays inside the tracks: near their right side it stands before the edge. Under the blocks, a key at each boundary names the transition into the next scene ("Cut", "Crossfade 500 ms") and opens the scene's Transition section; it never lies over a block or its trim handle. Where the two blocks beside it leave too little room for its words, the key shows the length alone, and where they leave less room than a key it is not drawn: the Transition section holds it.

On the Picture track a still reads "Still", with its poster at its left, made as the Video track's is. On the Picture and Overlay tracks the words keep one line: a block too short for them ends them with an ellipsis, and its whole name stays with it for a screen reader. A still with the room carries "Add a move" beside "Still"; a shorter still keeps "Still" alone, and "Add a move" in Properties adds the move. A short layer of the selected scene is drawn wide enough for its words beside "Remove". The Overlay track draws a block with no handle across each scene whose label the engine draws: "Label: the Director's words" where the film sets the label, and "Label: the engine's fallback" where the film sets none and the engine draws its own for the scene's kind (a recreation, a sketch) or its status labels. A scene whose label the film sets to none has no block. Each line on the Voice track reads its speaker and its words ("Johnny: …"). On the SFX track, select a pin's scene and stand the playhead inside it: "Add a mark here" places that pin's sound as a mark at the playhead, beside "Remove" on one row under the pin. Pins at the same time share that row, and each key names its pin ("Remove sting-1", "Add sting-1 here"). Space presses a focused key such as "Remove" or "Play from here"; on a block, a grip or a pin it plays or pauses the film. On the Bed track each run reads its bed and its scenes ("bed-main · scenes 1 to 23") and "Heard as mixed in the local draft", with a short mark at the start of each line the mix voices, where it ducks the bed under the voice ("Ducks under the voice"). A line with no recorded take, a stand-in take or a line left unspoken on purpose has no mark, since the mix does not duck there. The browser draws no waveform: each run reads "No waveform for this bed". Over the ruler, each chapter spans its scenes on a woven strip, and the ruler carries the playhead's time in a flag beside the playhead ("0:56.400"). Each track's head is a spool end with the track's glyph before its name.

Choose a mode

Tab
Focus the chosen mode
Left or Right arrow
Choose the other mode

If the setting cannot be saved, it says "Your mode was not saved. It stays on this device." Use "Try again" to send it again. "The setting could not be written. Reload the page." asks you to reload before another attempt. Offline, "You are offline. Your mode is kept on this device until you reconnect." means the choice waits on this device until the connection returns.

Your account has the final choice
The device remembers the last view so the first paint can show it. Once the account's saved preference arrives, that preference wins. The setting is shown only when your account can read the studio's film list.

#Monitor

In Advanced the film plays in the monitor, the workspace's middle region above the tracks. Its head names the scene under the playhead ("Scene 3 of 34", and "Now playing: scene 3, line 2" while it plays) beside "Play from here", which plays the selected scene from its start. One row under the picture holds "Play" or "Pause", the previous and next scene, a frame back and forward, "In", "Out", "Loop the range", "Follow playback", the playhead time and "Monitor menu". On a narrow window the row scrolls sideways with its Previous and Next keys.

The monitor, the ruler and the tracks share one playhead and one In and Out range: "In" pressed on the tracks is the monitor's In. Type a time such as 0:12.400 in the playhead time and press Enter to move there; a time the film does not hold keeps the last one and says "Enter a time like 0:12.400". On a wide screen the time shows the frame as well ("0:12.400 f12").

"Loop the range" plays from In to Out and round again while it is on, once In stands before Out. "Follow playback" turns a page of the tracks when the playhead leaves them; scrolling the tracks by hand during playback turns it off. "Monitor menu" holds "Fit the picture" and "Actual size", which draws the picture at 1920 by 1080 and scrolls it inside the monitor. Playing, stepping and the range write nothing to the film.

Monitor keys, with the focus in the monitor

Space
Play or pause
L
Play forward at 2x; again for 4x, then 8x
K
Stop, and play at 1x next time
Left or Right arrow
One frame back or forward; ten frames with Shift
I or O
Set In or Out at the playhead
Shift+I or Shift+O
Go to In or Out
Option+X
Clear In and Out

The rate shows on the picture for a second ("2x", "4x", "8x"). The film's picture and sound play forward only, so J has no reverse here.

#Stage

With the film paused, every capture, overlay and lower third showing at the playhead has a box on the monitor's picture. Press a box to select it: the monitor draws the scene's frame over its plate, the box gains eight handles, and the title-safe box (5 percent in from every edge) and the label band (from y 700) show as thin lines. Hold Shift to add a box to the selection, or drag a rectangle on the empty picture to select every layer inside it. A picture whose size the film has not read (a file staged since the last check) has no box, and the drawn frame leaves it out.

  • Drag inside a box to move its layer; hold Shift to keep the move to one axis. A box within 8 px of a guide, the frame's edge or centre, or another layer's edge snaps to it, and the line brightens.
  • Drag a side or corner handle to change the width. The place holds a width alone, so the height follows the picture's shape, and the frame's edge stops the box.
  • Press an arrow key to nudge the selected layer one percent of the frame, or five with Shift. Each nudge is its own edit and its own undo step, said as it lands ("Nudged the lower third on scene 19 up 5 %"); in the edit log its row reads "1 layer placed". Arrows pressed in quick succession each wait their turn and each land.
  • Type "X", "Y" or "Width" in percent under the picture and press Enter. A value outside 0 to 100 says "A place sits inside the frame: 0 to 100 percent" and writes nothing.
  • A group of selected layers moves together and writes one edit.
  • A title has a box where its words draw. Press it to see the scene's frame with the title outlined; it says "A title is placed by its template." and stays where its template draws it.
  • A still that holds a move has a "Move" key at the picture's bottom left. Press it for "Scale", "Pan X" and "Pan Y" at the playhead; a value typed there writes a keyframe on the still's move ("Set the move of scene 12").

Every placement is checked before it is written. A lower third moved over the scene's label says "The lower third would sit on the label band. Move it above y 700." and returns. A layer that another window moved while its box was on screen is left where that window put it: the box returns with "Changed under you. Reload the film." and nothing is written. An animated place takes a keyframe at the playhead. "Guides" in "Monitor menu" turns the lines off; they are for your reference and are never in the export. The handles hide while the film plays and offline they move nothing. Press "Done" at the top right to see the draft part again.

#Bins

The bins stand at the workspace's left, beside the monitor: a rail of Templates, Sound (with its count), Stock, Generated and Files beside the open bin. On a tablet they open as a sheet from the key at the left edge. Up and Down move between them; pressing the open bin's key, or "Hide the bin", folds its panel away.

The Sound bin lists the platform's catalog under Music, Sound effects and Ambience, with a search, "List" and "Icons", and each row's length, its play key and its rights line exactly as the film would write it ("'Rain on glass' by A. Author, CC BY 4.0, changes: trimmed"). A tab lists 48 sounds first; "Show more" lists more. One sound plays at a time. "Use" places the sound on the selected scene, and asks how by the row's kind. Music asks "Bed or sting?": a bed is set on every scene in a row that plays one bed, so the key names them ("Set the bed of scenes 1 to 3"), and "Sting" places a sting at the playhead. A sound effect is placed as a sting, and ambience is set on the scenes that share the selected scene's bed ("Set the ambience of scenes 1 to 3"). When the save refuses a placement, the bin shows the save's own sentence; when another edit landed first, the studio reads the film again and the bin asks you to place the sound again. A row whose licence the film cannot export says why and cannot be used. Drag a row by its name onto the tracks instead: the tracks its kind goes on light (Bed and SFX for music, SFX for a sound effect, Bed for ambience), the line beside the pointer says what the drop makes ("Set the bed of scenes 1 to 3", "Place as a sting at 0:12.400"), and a drop on another track goes back with the tracks it goes on ("Sounds go on the Bed or SFX track"). A locked track does not light and takes no sound, by a drop or by "Use": the bin says "The Bed track is locked."

Templates, Stock and Generated open on the selected scene: "Open the Templates gallery" opens the Layers section of the properties panel, "Open the Stock picker" its Stock section, and "Open the generation sheet" the generation sheet. Where properties are hidden, the Templates and Stock keys show them first; on a tablet properties open as the side sheet.

The Files bin lists every file staged for this film, newest first, with its kind, size, licence and rights line, the storage line, your files' size against your plan's room, the "Pictures", "Footage", "Sound" and "Generated" chips and a search by name. "Use" places a picture as the selected scene's picture, music as its bed and a sound effect as a sting at the playhead, as one edit you can undo from the edit log. Footage is placed from the Stock bin, which sets its window. A CC BY file is placed with its credit and the line that says what was changed. The list reads a page of each kind at a time; "Show more" reads the next. On the demo reel the bin says that the files need you to sign in.

#Properties

In Advanced, "Properties" shows what is selected: the line under it names the scene ("Scene 3 of 34 · The waiting room"). Its sections fold, and each fold stays as you left it on this device. With nothing selected the panel says "Select a scene, a layer, a bed run or a sting to see its properties." The panel scrolls inside its own height, so the page stays the same length.

  • "Scene" holds "Length", typed as a time ("1:29.000", "0:19", or plain seconds such as "12.5"), with "End at the playhead" beside it, and "Transition" into the next scene with its length. A time it cannot read keeps the last value and says "Enter a time like 0:44.000". The last scene says "The film ends here. Nothing to run into."
  • "Properties for" picks the scene's picture, its clip, a layer, the bed run or a sting. Its section shows only what the engine draws or mixes for that choice: a clip's start, end, speed and sound; a layer's words, start and length with "Start at the playhead" and "End at the playhead"; a bed run's fields and its duck; a sting's fields.
  • Each property that can change over time (Move, Opacity, Place, Gain) has a stopwatch on its heading. Pressing it sets a keyframe at the playhead; pressing it again asks "Remove the 2 keyframes of Opacity? The value at the playhead is kept." "Previous keyframe", "Add or remove a keyframe here" and "Next keyframe" step between the points, and "Keyframes" lists each point with its time, value and ease ("Linear", "Ease" or "Hold").
  • A change is checked first: "Checking" shows while the dry run runs, then "Apply" writes it and "Reset" puts the stored values back.

Offline, the panel shows the stored values with every field disabled and says "You are offline. The timeline shows the last read; edits need a connection."

Under the panel, two tabs share one row. "Edits" holds the film's log, newest first, with "Undo" and "Revert to here" as the Basic view has them. "Inspect" reads the cut as the engine sees it: "Title card at 69 percent: inside its 60 to 80 percent window", then one row per scene with its start, length, lines, visual, transition and chapter. Choose a scene's number to select it and move the playhead to its start; "Refresh" reads the report again and says when ("Read at 08:12"). If the report cannot be read it says "The inspect report could not be read." with "Try again".

#Phone

When Advanced is chosen in a window narrower than 768 px (a phone, or a tablet in split view), the page says "Advanced tracks need a tablet or wider. The Basic view is shown here; your choice is kept." In the film workspace the sentence stands in the workspace's header, under the "Basic" and "Advanced" keys. The cards remain usable. "OK" dismisses that sentence for the visit; it does not change the saved mode. Choose "Basic" to change the preference itself.

#Guide

"Guide" opens this section from the mode setting. On desktop and wide screens the article opens beside the screen. On a phone or tablet it opens as a page, with the same heading address.

The first-visit pointer reads "New here? The Advanced timeline has a guide." Press "Got it" to record that you have read it on your account. It stays dismissed on later visits and other devices after the saved preference is read. A failed save leaves the pointer available to try again; opening a guide never changes the film.

← PreviousMultiplayer and co-op sessionsNext →Parties: group chat with friends and characters

Related guides

The Basic timeline

Select a scene, adjust the cut and read its findings.

Read →
The studio page

Review the film, proposals, activity, notes and keys.

Read →
WildWeave writing studio

Write the documents that accompany your film.

Read →
Online
|Persona: Default
Voice: Off