Skip to main content
Wilds.aiStudio Page
W
The studio page — wilds.ai Help

← Back to Wilds Handbook

Help & Guides

The studio page

Read film readiness, decide proposals, follow activity, save notes and manage studio keys in WildWeave.

6 min read•Updated November 18, 2026

On this page

  • Films
  • Proposals
  • Activity
  • Notes
  • Keys
  • Export
  • Shortcuts
  • Looks

The studio page gathers the film's readiness, the roles' proposals and the work still owed. Open a part to read it, then act on a proposal, note or key without losing the film's context.

#Films

Open "Studio" from Wildweave. Its parts are "Film", "Proposals", "Activity", "Notes" and "Keys". "Refresh" reads the current state. Each part has "Guide" at its header. On a first visit a line under the header says "New here? The guide walks this screen."; "Got it" dismisses it for your account. On a desktop "Guide" opens the guide beside the screen at the part's section, with "Open the full guide" and "Close guide" kept at the panel's top.

"Film" shows the import, length, scene count and preview readiness. "Open the film" takes you to the cut. "As imported" and "Edited since the import" distinguish an untouched import from an edited cut. Readiness distinguishes "Stale", "Placeholders" and "Missing", as well as "Bed ready" and "No bed". If it cannot be read, the part says "Readiness could not be read."

"Owed" names unfinished work and who can finish it. "Check the cut" refreshes the findings, with "Checking the cut" while it runs. "Nothing is owed on this film." is the clear state. "Reading what is owed" means some sources are still loading. "The cut check did not run." offers "Try again". "Hide the local-only line" hides that readiness explanation from the list.

"No film in this account. A film arrives through the import command, which the Editor runs from the film's repository." means there is no imported film to review yet. On a plan the import is not open to, the empty desk reads "Start with the demo reel. Keep a copy and edit it in your account." with "Keep a copy", which adds your own copy of the demo reel to the account and opens it. "Reading the studio" is the loading state. If "The studio could not be read." appears, choose "Reload". "The film's documents could not be read. The Editor imports the film again." needs a fresh import.

Read the connection state before deciding
"You are offline. The studio shows the last read; decisions, notes, reverts and keys need a connection." The visible list can be an earlier read. Reconnect and refresh before making a decision.

#Proposals

The inbox filters suggestions by "Proposed", "Yes", "No", "Noted" and "All", and by "Clips", "Memes", "Marks", "Splits" and "Other". "Find in proposals" searches the list; "No proposal matches" means that search has no result. "More" opens the full proposal with its scene and rights line.

"Play the draft" previews the scene; "Pause" holds it. "Open in the timeline" opens the scene in the cut. "Previous" and "Next" move between proposals. With "Next after a decision" on, a decision moves to the next proposed item.

Choose "Yes" or "No" for a decision. "Note" and "Save the note" record "Your words" without guessing a verdict from the text. "Final" marks a final word; "Said in the app" and "Relayed from a message" show its source. "Words are needed for a note." asks for text. "A character in the words could not be stored. Remove it and save again." asks for a corrected draft. The field says "2,000 characters at most".

"No proposals for this film. The roles propose clips, memes, marks and splits here." is an empty inbox. "Every proposal is decided." means none await a decision. "No proposals with this status." is an empty filter. "This proposal is gone. Reload the list." means another read is needed. "The decision did not reach the studio." leaves "Try again" available.

A proposal's rights line belongs to that proposal
Read the rights information before deciding. A yes or a note records your word; it does not replace the proposal's source or rights information.

#Activity

"Activity" follows the roles' proposals, edits and your decisions. Choose "Today", "This week" or "All" and use "Load more" to read earlier entries. Actors include "You", "The Director", "The Editor", "The Writer", "The memes role", "The sound role", "The librarian" and "The studio key". "No activity in this range. The roles' proposals, the edits and your decisions show here." is the empty state. "Proposals could not be read." offers "Try again".

"Edits" records the cut's changes, with "Reverts", "Imports", "Acknowledgements" and "Preview pushes" available as filters. "Undo" reverses the latest eligible edit; "Nothing to undo" explains an unavailable undo. "Revert to here" asks before changing the cut. "Revert" confirms and "Keep" cancels.

"An import sits between. Reverting across it is the Editor's decision, with the tool." stops a revert across an import. "Changed since you read it" means the log has moved; "Read again and revert" reads the current state before another attempt. "No edits since the import." is the empty log. "That edit is gone from the log. Reload the film." asks for a new read, and "The revert did not reach the studio." leaves a retry available.

#Notes

Use "Notes" for words the roles should read. A note can be spoken or typed, then saved with "Save the note". "Withdraw" asks "Withdraw this note? The roles stop seeing it." Choose "Keep" to cancel. "This note is gone." means it was removed elsewhere; "The note did not reach the studio." leaves it available to try again.

"Hold to speak" records while held; "Tap to start and stop" is the tap option. "Microphone" selects the input, "Mute" and "Unmute" control it, and "Stop" ends recording. "Listening" means the microphone is active; "Transcribing" means the recording is being read. "Use these words" puts the transcript into the draft. "Discard" drops it, and "Type instead" lets you continue without speech.

"No sound reaching the microphone" asks you to check the input. "No words were heard. Try again closer to the microphone." lets you record again. "The browser blocked the microphone. Allow it in the address bar, then try again." and "No microphone was found. Plug one in or type instead." explain why recording cannot begin. "Typing only in this browser" keeps the typed route available. You review the transcript before saving a note.

"On the film" identifies a film-wide note. "Privacy" opens the product's voice-processing explanation. If the recording exceeds its bound, "Try a shorter note" asks for a shorter recording. A preview that fails to load says "The part could not be loaded"; retry it before deciding from the picture.

#Keys

"Keys" holds the studio keys used by tools. "Mint a key" opens the form. Give it a "Label" and choose its "Scopes", then press "Mint the key". "Choose at least one scope." explains an empty selection. "No studio keys. Mint one for the tools that edit, render and import." is the empty list.

"A label names the tool that holds the key." explains the label field. The scopes can read "read, write, render, import"; choose only the scopes the tool needs. "Never used" means the key has no recorded use yet.

"Your new key" shows the secret once. "Copy" changes to "Copied" after copying. Save it where your tools read it, then choose "I saved it". "Close without saving the key? It cannot be shown again." offers "Close" or "Keep open".

"Rotate" asks "Rotate this key? The old one stops working the moment the new one is minted." "Revoke" asks "Revoke this key? Tools holding it fail on their next request." "Keep" cancels either question. "Revoked" marks a key that no longer works; "Last used" shows its last recorded use. "Refresh" reads the list again.

Keep the new secret before closing
Rotation makes a replacement key and stops the old one. Update the tools that used the old key. The studio cannot reveal a saved key's full secret again.

If "The key may not have been minted. The list was read again; mint once more if it is absent." appears, read the list before minting again. "This key is gone or revoked already. Reloaded." means another action changed it. "The change did not reach the studio." leaves "Try again" available.

#Export

"Export and render" reads the source comparison and pushed draft state. "Export state" on the film page opens the same comparison. "Refresh" reads it again; "How the export works" explains the handoff. The comparison is the repository export's, which comes with Forge; on another plan the part reads no comparison, and the rest of the desk stays open.

"The Editor writes the sources into the repository with the export tool." means a source comparison is not itself an export. "No draft parts pushed. The Editor renders a draft and pushes it." explains a missing draft. "Renders run on the local engine. The box's render worker is not open." describes the current render boundary. This guide does not promise a browser render worker.

While loading, the comparison says "Comparing with the repository". Its rows can read "Timeline: changed", "Sidecar: unchanged", "Script: unchanged", "Beat sheet: unchanged" and "Takes: unchanged". "The export state could not be read." and "The push state could not be read." distinguish failures of those reads; retry the affected read.

#Shortcuts

Open "Shortcuts" to read the keys. While the sheet is open the app's header is dimmed and takes no presses. "Close" returns to the part. Shortcuts act outside text fields, and write shortcuts need a connection.

Studio shortcuts

J / K
"Next or previous proposal: J, K"
Enter
"Open: Enter"
Y / N
"Yes or no on the proposal: Y, N"
T
"Note: T"
M
"Hold to speak: M"
Escape
"Close: Escape"
?
"This sheet: ?"

#Looks

Choose "Deep Wilds", "Frost Meadow", "Blood Moon", "Gilded Library", "Void" or "Arctic Mist" in the theme picker. The header and navigation rows stay on one row. A row of tabs wider than the screen scrolls sideways under an arrow key at each end, named for the row: "Previous Studio tabs" and "Next Studio tabs" on the page's parts, and the same pair on the "Review" and "History" rows. Each key is off at its end of the row, and the chosen tab stays in view when the screen narrows. Any other row wider than the screen has the same keys at its ends; it also scrolls.

← PreviousThe Advanced timelineNext →Titles and credits

Related guides

The Basic timeline

Inspect the cut and edit individual scenes.

Read →
Studio modes

Keep your view preference across films and devices.

Read →
WildWeave writing studio

Write the documents and storyboards behind the film.

Read →
Online
|Persona: Default
Voice: Off